At first, you need to enable serial ports in your BIOS and wire them up to the case front (if they aren't allready). Make sure you have the following in your /boot/grub/menu.lst: > serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1 terminal…
Okay ... we got the serial port running (same like WRT54GS), so we could be more risky. After some tries I decided to work analog the WRT54G models. Successfull was the following modifications to factory (linksys) defaults: > nvram set vlan0ports="0 1 2 5*" nvram set vlan1ports="…
[https://log.cyconet.org/content/images/2006/06/wrtsl54gs.jpeg] Don´t ask how, but we got some units to europe. The first thing we does, was to install openwrt [http://www.openwrt.org] and to try debridge the switch to have multiple interfaces instead. We was able to remove…
On the way to get an acceptable mail client (kmail) on Mac OSX, I installed fink [http://fink.sf.net] and updated to unstable tree and did run selfupdate-cvs. After the update FinkCommander [http://finkcommander.sf.net] neither the version shipped by fink 0.8 nor the latest binary package…
The next two weeks, I`ll take some vacations, half of it's with rarely and slow IP connection. I don't know right now, if this is luck or bad luck, but I'll see hows going. I hope the weather will be much better than…
Today my goal was to get an AVM Fritz!Card running to send SMS via yaps [http://www.sta.to/ftp/yaps/]. Since on the old system is running kernel 2.4.x at the time of setup the only option was to use the capi driver and some hacks…
Since I started playing around with vserver there is the problem left restricting the capacity of the disk usage of the guests. One solution may be to use one partition per vserver guest. But what to do if there is more (or less) space needed on the systems? Shutting them…
If you want to use X11 forwarding through ssh you need to modify your /etc/ssh/ssh_config: # echo "X11UseLocalhost no" > /etc/ssh/ssh_config # /etc/init.d/ssh restart…
