At first ... I'm not responsible, if you brick your router by using this documentation. If your fear it would be possible, stop HERE! The following NVRAM-Settings need to take place: > !/bin/sh Port 0 into WAN, 5 Router themselv nvram set vlan1hwname=et0 nvram set vlan1ports="…
REQUIREMENTS: At first, you need a running tftp server and a rarp daemon to boot the installer on the box. # apt-get install rarpd atftpd # nano /etc/ethers Put IP and MAC into /etc/ethers file: > 00:03:ba:2b:a3:df 10.0.0.2 Run: # cd /tftpboot # wget…
We decided, after we will reach the next billing category 2007 anyways (you remember, we got /18 allocated), that it will be neat to request a /32. I created a sweet address plan and got the allocation in less than 5 hours approved. :-)…
In the last days, I did clean up our RIPE database objects and our files. The reason is ... I did request new pa-ipv4 on Wednesday. :-) I did fix up the 2 files, which was requested by RIPE hostmaster and I got it passed. Also my IP plans was accepted,…
Yesterday I finished the RIPE LIR Course second time. They told us, that database objects are filtered since some weeks and with the -B you can get it unfiltered. This fact I was searching 2 weeks ago for some hours. I didn't recognize the announcement on db-wg mailinglist.…
Today I was finally soldering the Serial Mod I got from Stephanie Lange [http://hamburg.freifunk.net/twiki/bin/view/Technisches/BasteleienUndBausaetze#Linksys_WRT54G_GS_Dualserial_Mod] and got the serial console working on a WRT54G V2.0 model. [https://log.cyconet.org/content/images/2005/10/100_6115.jpg]…
Since my job and my family keeps me busy there isn't much time left for playing around. This week I scheduled some couple of hours for investigating the development of the experimental branch. A nice feature is the jffs2 filesystem, which allows you to write on the complete…
Okay ... the first step was done by getting the box a ip and starting telnetd. But this cant be all. :) So i was searching a bit around .. with the standard codec used for voip, the upload was round about 85-90 KBit/s, so its tamped. If there is started a…