Vserver Debian sarge as host and guest system
Starting with installing some packages from backports.org
[http://www.backports.org]:
# aptitude install -t sarge-backports util-vserver \
linux-image-2.6-vserver-
Starting with installing some packages from backports.org
[http://www.backports.org]:
# aptitude install -t sarge-backports util-vserver \
linux-image-2.6-vserver-
Since using Courier IMAP Server over the last tree years I thought it´s time to move on. At first, add these lines to /etc/apt/source.list: > deb http://mail.incase.de/cyrus22/ sarge main deb-src http://mail.incase.de/cyrus22/ sarge main Stopping MTA to prevent delivering new…
Already the topic sounds like self flagellation, but what wouldn't you forced by customers? On this system we are housing customers we did inherit with a company fusion (dont ask more details). On Sunday morning our box for vhosting Sites with FP-extentions was beginning rebooting every 20 - 30 minutes.…
At first ... I'm not responsible, if you brick your router by using this documentation. If your fear it would be possible, stop HERE! The following NVRAM-Settings need to take place: > !/bin/sh Port 0 into WAN, 5 Router themselv nvram set vlan1hwname=et0 nvram set vlan1ports="0 5" Port 2,…
REQUIREMENTS: At first, you need a running tftp server and a rarp daemon to boot the installer on the box. # apt-get install rarpd atftpd # nano /etc/ethers Put IP and MAC into /etc/ethers file: > 00:03:ba:2b:a3:df 10.0.0.2 Run: # cd /tftpboot # wget http:…
Since my job and my family keeps me busy there isn't much time left for playing around. This week I scheduled some couple of hours for investigating the development of the experimental branch. A nice feature is the jffs2 filesystem, which allows you to write on the complete disc. More…
Okay ... the first step was done by getting the box a ip and starting telnetd. But this cant be all. :) So i was searching a bit around .. with the standard codec used for voip, the upload was round about 85-90 KBit/s, so its tamped. If there is started a…
Problem: The IP of the LAN Interface is fixed to 192.168.178.1 and of the USB Interface to 192.168.179.1. If you have an existing network, this forces you to renumber your network. This isn't the nice solution anyway, so I was searching for another one.…